Inspection & Testing Equipments

Sr. No.	Name Of Machine	Capacity	Make	No. of Machines	Work Description
1	Universal Tensile Testing Machine	40 Tons	F.I.E.	1	To obtain the mechanical properties of finished tubes & pipes and testing for flaring, flange test, flattening, R.flatting, reverse bending
2	Universal Tensile Testing Machine	60 KN	Innotech Engineer	1	To obtain the mechanical properties of finished tubes & pipes and testing for flaring, flange test, flattening, R.flatting, reverse bending
3	Hardness Testing Machine	HRB,HRC and BOT 45TSCALE	Saroj Engineering Pvt. Ltd.	1	Hardness tester is used for measuring hardness values of tubes & pipes.
4	Hydrostatic Test Machine	6 mm OD to 273 mm OD 6 inch to 10 inch	Indiginus	3+1	All hydrostatic test machine is used for carried out on finished tubes / pipes to check the tube for any leakage under elevated hydraulic water pressure as per specification or customer requirement.
5	U' Bend Hydrostatic Test Machine	12.7 mm OD to 50.8 mm OD	Indiginus	2	U' Tubes hydrostatic test machine used to carried out on tubes / to check the leakage under elevated hydraulic water pressure as per specification or customer requirement.
6	Air Under Water Test (Pneumatic Test)	6 mm OD tO 30 mm OD	Indiginus	1	Pneumatic Test is carried out to check any leakage in the tube by air pressure under water.
7	Eddy Current Testing Machine	8 mm OD to 114.3 mm OD	Technofore Pune	1	This is the non destructive test carried out to detect the surface defect/ pin holes on the outside diameter or inside diameter of the tube
8	Polishing Machine	DISC DIAMETS 200mm	Indiginus	1	Single 200 mm diameter disc polisher with variable speed facility for polishing of test pcs.
9	Spectrometer	26 Elements Percentge Analysis	Bruker Elemental GMBH Germany	1	Spectrometer which is used for in house product analysis. It can measure upto 26 elements and gives the result of any sample within 60 seconds. It gives us very fast & highly accurate results.
10	Spectro Mobile For PMI Testing	7 Elements Percentge Analysis	Bruker S1 SORTER Germeny	1	This instruments make analyser for pmi and quality control/ assurance.
11	Dye Penetrant Test	Detect Micro Crack	P-MET Baroda	10 Kits	Dye Penetrant Test is carried out on tube & pipe surface to detect cracks, flaws or any type of defects.
12	Surface Roughness Tester	Upto 350 Microns	Japan Mitutoyo	1	Test is carried out for measuring roughness of the tube & pipe for outer surface
13	Chemical Testing Laboratory	Practice 'A' & 'E'	In House	1	Established in UNIT - II, facility to carry out day to day testing of different solution used in pickling department & IGC testing practice 'E' as per ASTM A-262
14	Visual & Dimension Inspection Skids	Visual Inspection	Indiginus	20 PAIR	Inspection is carried out for any type of surface defect, or scratch on the surface of tube/pipe,dentes and the dimensional inspection is carried out with calibrated measuring instruments for product dimensions are within tolerance requirements.
15	Microscope	Magnification 100 X to 400 X	QUASMO Model SP-16 LCD	1	Involves grain structure examination as per specification.(Microstructur as per E-112)
16	Dial Verniyer Caliper	8 inch.	Mitutoyo Japan	1	Measure diameter & thickness of the tubes & pipe
17	Ultrasonoc Thicknees Gauge	0.75 mm to 300 mm	Samsonic Model UTG - 111	1	This instrument measure the thickness at any point of the tube & pipe with accuracy of 0.1 mm